How does the
Fogtrap® Work?
The Fogtrap system is a mobile grease trap that requires no electrical connections, zero staff input, has no smell issue as the units are sealed and then cleaned offsite and no water feeds are needed.
The Fogtrap system separates Fats, Oils & Grease using our internal baffles which allows the separated grease to rise to the top and any food sediment to sink to the bottom.
The Fogtrap system is then exchanged on a planned maintenance visit which involves our very own engineers installing a completely new and empty unit, this process allows for a quick and odourless service as the Fogtrap system is not emptied on site which can be completed in as little as 5-10 minutes.
The Fogtrap contents are fully recycled as shown on our Fog to Fuel diagram.
The system consists of 2 inlet connections(one on each side)and one outlet connection, however only one inlet connection is allowed at one time. This allows for the Fogtrap to be flipped round and the inlet connected off either side depending on the pipework setup. The Fogtrap will be connected as close to the required equipment as possible and will be gravity fed.
The FOG to fuel journey
We are big believers in the circular economy and are excited to announce that Dyno-Rod has made a significant leap forward in our commitment to the environment by switching our entire fleet of vehicles to HVO (Hydrotreated Vegetable Oil) fuel. By making this switch, we will offset a staggering 400,000 tonnes of carbon per year. The more we can recycle our waste, the more we help reduce the environmental impacts of our production and consumption. We’re proud of the part we play to support the sustainability movement.
Sizes
Please find below dimensions of our Fogtrap systems. We currently install either the Fog 90, or the Fog 110 depending on the size available.
In addition to the above dimensions, a little room is required either side of the Fogtrap to allow for the fittings / connections. Should you require any further information please do not hesitate to contact our offices.
Sizing Requirements for installation
Additional space is required for fitting and exchange process. Please refer to the guide to the right.
